Side shift backhoe loader is one of the most popular heavy equipment in the world that consists of a 0.3 m³backhoe bucket and a 1.0m³ bucket on the front.Due to its small size and design,just one single person can operate the loading and digging tasks at the same time so it is very time-saving and high efficiency.The excavating working device is side shift type,high strength and good structural stability and the operator can maneuver in tight places.Except the normal or standard bucket,the side shift backhoe loader can also be equipped with other attachments,such as snowboarding which is suitable for client from cold place.Here is the specification:
| Overall dimension | Operating Weight | 8200KG |
| Overall dimension(L×W×H) | 6050×2465×3100mm | |
| Wheel base | 2280mm | |
| Wheel tread | 1785mm | |
| Ground Clearance | 300mm | |
| Performance | Loader bucket capacity | 1.0m³ |
| Loader breakout force | 47KN | |
| Loader lifting capacity | 2500KG | |
| Loader dumping height | 2760mm | |
| Loader dumping reach | 900mm | |
| Loader digging depth | 52mm | |
| Backhoe bucket capacity | 0.3m³ | |
| Backhoe bucket digging force | 50KN | |
| Backhoe swing angle | 180° | |
| Backhoe dumping height | 3795mm | |
| Backhoe max digging depth | 4085mm | |
| Max. traction force | 60KN | |
| Engine | Model | Yuchai YC4A105Z-T20 |
| Type | Turbocharging four-stroke | |
| Cylinder-inner diameter*stroke | 4-108×132 | |
| Rated power | 75KW/100HP | |
| Rated speed | 2200r/min | |
| Min. Fuel consumption | 230g/kw.h | |
| Max.torque | 400N.m | |
| Displacement | 4.8L | |
| Steering system | Type | Hydraulic Steering |
| Diverter model | BZZ5-250 | |
| Pump delivery | 63ml/r | |
| Steering angle | ±36° | |
| Min. turning radius | 6581mm | |
| Driving axle | Model | WZZ75D |
| Manufacturer | China axle | |
| Max. load of front axle | 22.5 ton | |
| Max. load of rear axle | 18.5 ton | |
| Transmission | Gearbox | Mechanically Operated Hydraulic Synchrinized Shift |
| Model | ZL15 | |
| Gears | 2 forward and 2 reverse gears | |
| Hydraulic torque converter | YJ290 | |
| Inlet pressure | 0.4-0.65Mpa | |
| Outlet pressure | 1.5-1.8Mpa | |
| Cooling mode | oil-cooling presssure circulation | |
| Pump delivery | 40ml/r | |
| Wheel | Front wheel size | 14-17.5 |
| Rear wheel size | 19.5L-24 | |
| Front tire pressure | 0.4Mpa | |
| Rear tire pressure | 0.35Mpa | |
| Travel speed | 24Km/h | |
| Brake system | Service brake | Air over oil caliper, external, self-regulation, self-balance |
| Parking brake | Manual brake | |
| System pressure | Loading hydraulic system | 19Mpa |
| Digging hydraulic system | 19Mpa | |
| Steering hydraulic system | 14Mpa |
